The flotation separator produced by adopts the new structure including forward tilting tank, double-sided blade water wheel, with the installation of diversion tube and false bottom device. The flow of the ore pulp fixed in the groove with up and down double-cycle way, which is advantageous to the suspension of coarse minerals, can be self-priming air, self-priming pulp, don't need the foam pump. Flotation machine as one of the most widely used mineral processing equipment, mainly using the chemical and physical properties of the mineral surface, with the aid of air bubbles' buoyancy from the pulp realize mineral separation process. In the ore dressing and metallurgical operation, it is very suitable for the selection of copper, zinc, gold and other non-ferrous metals, and also suitable for the coarse separating and fine separating of black metal and non-metal.
High flotation efficiency and low power dissipation;Each flotation tank has the triple function of suction air, suction pulp and flotation, the whole flotation cell is self-forming circuit and has high production efficiency.
Suitable for wide range of materials and convenient operation;The ore pulp cycle of flotation is reasonable, even coarse mineral can be process well, the design of its electric control device is convenient for adjusting the ore pulp surface level.
Easy to maintain wearing parts;The flotation cell's impeller with high strength alloy material is wear-resisting and corrosion resistant, and it's easy to replace and shorten engine's downtime.
Multiple models can be selected and supporting customization;The design of flotation separator and the selecting of efficient flotation reagent are according to the material's characteristics to reduce the cost of customer's investment.
The flotation separator consists of slurry tank, mixing device, inflating device, discharging mineralized foam device, motor and so on.
Slurry tank: It has the inlet of the slurry, and the gate device for regulating the slurry, which is mainly composed of the channel welded with steel plate and the gate welded with the round steel.
Mixing device: It is used to stir the ore pulp to prevent the deposit of ore sand in the tank body, which consists of pulley, impeller, vertical shaft, etc. The impeller is made of wear-resistant rubber.
Inflating device: It is made up of inlet duct, when the impeller rotates, negative pressure is formed in the impeller chamber and absorb the air which through the hollow pump line, and then these air dispersion in the slurry forming bubble group. The pulp with a large number of air bubbles by the rotation of the impeller force and was soon thrown to the stator, further making bubbles in pulp refining, and eliminate the rotation of the pulp flow in the flotation cell, resulted in a large number of micro bubble raising vertically, providing the necessary conditions for the flotation process.
Discharging mineralized foam device:, The motor drives reducer and the reducer drives the scraper blade, meanwhile, the scraper blade will scrape the foam floating on the trough.
|Main shaft loam board||Dimensions
Leave a Message
Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.
Contrastive Analysis of Cone Crushers and Jaw Crushers
Contrastive analysis of cone crushers and jaw crushers.1.Category description of cone crushers and jaw crushers.2.Structural description of cone crushers and jaw crushers.3. Operating principle of cone crushers and jaw crushers.4.Applicable materials of cone crushers and jaw crushers. 5.Crushing capacity of cone crushers and jaw crushers.
Whether It's Good or Bad If a Cone Crusher Is Very Cheap
Some customers want to buy a cheap equipment, but at the same time they worried about the quality may be poor. So, if a cone crusher price is cheap, whether it is good or bad for users? How can we choose the most appropriate cone crusher that suitable for us? Let explore together.
Outstanding Advantages of FTM Jaw Crusher Liner
FTM jaw crusher liner is composed of the liner body, the hollow lightening hole in backside, anti-loose fixture block hole, reinforcing rib, anti-loose fixed block, lifting hole, etc. Each parts strengths of FTM jaw crusher liner will be presented below.
Common Senses on Lubrication System of Symons Crushers
Common senses on lubrication system of symons crushers,1. Lubricating oil enters the symons crushers in two ways.2. Keep the lubricating oil warm in winter.3. Lubricating oil temperature shall not be higher than 60 ℃.4. Control oil pressure.5. The limit of water which entering the heat exchanger.6. Conduit cleaning of the lubrication system.7. Oil level in the oil receiver.8. Keep the filter clean.9. Inspection frequency.
Why Is the Jaw Crusher Favored by Massive Users
Why is the jaw crusher favored by massive users? Firstly, the jaw crusher can complete the crushing process independently.Secondly, the jaw crusher is all-match, not just talking, it can be seen in every production line in the mine production.
Why Is the Product Quality of Cone Crusher Unqualified
Why is the product quality of cone crusher unqualified.1. The moving cone and fixed cone of cone crusher are broken.2. The crushing chamber of cone crusher hasn’t been designed reasonably.3. Materials do not fit the bill of cone crusher.4. The discharge port of cone crusher is adjusted too large.5. Unstable voltage